Scroll to top
Availability: In stock


MRP: Rs. 699
Our Price: Rs. 554
BV: 3
Description Scotch Moda Tie by Grado

A necktie, or simply a tie, is a long piece of cloth, worn, usually by men, for decorative purposes around the neck, resting under the shirt collar and knotted at the throat. The Scotch Moda Tie will completment your waist coat, blazer and your exclusive suit that you can carry in a party and make heads turn around.

Why Scotch Moda Tie by Grado?
  • Stylish and sophisticated, A fine clothing fabric.
  • A versatile fabric makes it a perfect choice for Business Clothing, Suits, Formal Wear, Party Wear, Casual and Evening wear.
  • This fabric has a Soft Touch finish to it, making it feel like a very highend fabric.
  • Look cool and smart, feel comfort and make the right impression with Suits.
Manufacturing Process
  • Cutting the outer fabric: 1 In the workroom, an operator first spreads the 40-yard bolts of cloth on a long cutting table. Cutting the outer fabric is done by a skilled hand to maximize the yield, or the number of ties cut from the piece of goods. If the fabric has a random design, the operator stacks between 24 and 72 plies of fabric pieces in preparation for cutting the fabric. If pattern of the fabric (or of the "goods") consists of panels, such as stripes with a medallion at the bottom, these panels are then stacked according to the pattern.
  • Adding the facing: 2 Using the chain stitch of a sewing machine, sewing operators join the tie's three sections on the bias in the neckband area. The operator now adds the facing, or tipping (an extra piece of silk, nylon, rayon, or polyester), to the back of the tie's ends. Facing gives a crisp, luxurious hand to the shell. Two types of facing are currently utilized. Three-quarter facing extends six to eight inches upward from the point of the tie, while full facing extends even higher, ending just under the knot.

    3 A quarter to a half of an inch of the shell of the fabric is now turned under, to form a point. The point is then machine-hemmed by the sewing operator.
  • Piece pressing: 4 Quality silk ties are pocket or piece-pressed. This means that the joint at the neck (the piecing) is pressed flat so the wearer will not be inconvenienced by any bulkiness.
  • Interlining: 5 The interlining is slip-stitched to the outer shell with resilient nylon thread, which runs through the middle of the tie. Most ties are slip-stitched with a Liba machine, a semi-automated machine that closely duplicates the look and resiliency of hand stitching. Hand stitching is often used in the manufacture of high-quality neckties because it offers maximum resiliency and draping qualities.

    The technique is characterized by the irregularly spaced stitches on the reverse of the tie when the seam is spread slightly apart; by the dangling, loose thread with a tiny knot at the end of the reverse of the front apron; and by the ease with which the tie can slide up and down this thread.
  • Turning the lining: 6 Using a turning machine or a manual turner (with a rod about 9 1/2 inches long), an operator turns the tie right-side out by pulling one end of the tie through the other. While not yet pressed, the tie is almost complete. On silk ties only, the lining is then tucked by hand into the bottom corner of the long end of the tie. If necessary, the operator hand-trims the lining to fit the point of the long end. (In all other ties, the lining does not reach all the way to the bottom corner.

    7 A final piece to be sewn on is the loop, which serves both as a holder for the thin end of the tie when it's being worn and as the manufacturer's label.

Click on the image to download it

Click on the image to download it

Safe Shop India